truk4u
11-19-2006, 09:34 AM
Jeep,
Let me know if you have the Genmate manual, if not, I will tell you what position to place the dip switches. You want to set the dips for a high start voltage, suggest 12.4/24.8 and have the autogen button on the dash pushed to on. With the bus unplugged and the inverters running, use enough 110 volt juice to get the batteries down below the start voltage. You also must be sure the Autogen is not disabled in the generator bay. Once the voltage drops below the set values, it should start. This will tell you if it works and then we can go further with the dip switches. My inverters are backlit in the bus.
NOTE - If you have trace inverters, the gen auto start function is disabled through the inverters and cannot be activated. They did this so as not to conflict with the Genmate.
Let me know if you have the Genmate manual, if not, I will tell you what position to place the dip switches. You want to set the dips for a high start voltage, suggest 12.4/24.8 and have the autogen button on the dash pushed to on. With the bus unplugged and the inverters running, use enough 110 volt juice to get the batteries down below the start voltage. You also must be sure the Autogen is not disabled in the generator bay. Once the voltage drops below the set values, it should start. This will tell you if it works and then we can go further with the dip switches. My inverters are backlit in the bus.
NOTE - If you have trace inverters, the gen auto start function is disabled through the inverters and cannot be activated. They did this so as not to conflict with the Genmate.