slode outs

[pump7167]

my 2005 cc has been in the warehouse for several months with out extending the slide outs. brought home to ready it for a trip the rear slideouts worked fine but the front will deflate the seals and the pin retracts and after about 10 sec i get a 4 light blink on the control switch. i confirmed the seal is deflating and all four pins are retracting but nothing after that. i checked the fuses and made sure my lift axile was in down postion also rhat my level switch was in the correct postion. can anyone give me any ideas thanks pat chism

[garyde]

I would call Prevost on their 800 number. It sounds like the Pins are stuck. Make sure your air is up to pressure as you may need the air to operate the pins.

[Mark3101]

You can call Prevost to get the scoop on the blink code. That will also help diagnose the issue.