Reset Procedure for Duo-Therm Control

[LarryB]

I can't find my directions for the reset procedure to reset the control panel for the Duo-Therm temp controller. Can anyone help?

Thanks

[flyu2there]

I can't find my directions for the reset procedure to reset the control panel for the Duo-Therm temp controller. Can anyone help?

Thanks

Larry,

Is that a fancy way of saying thermostat? Should it be your main t stat if off/on doesn't do it you probably need a new one, they tend to be fragile.

[LarryB]

John, Not the 'T' stat, the 4 button controller for the airs and webasto. The unit worked ok until the bus was completely powered down for some inverter work, and the tech forgot to reset the controller.

[flyu2there]

Larry,

You say potatoe, I say patato...... That little unit controls the heating and cooling off the roof air's, in the "furnace" mode it starts the Webasto. Mine failed some time ago, installed a new one. One card, a LED screen and a few jumpers, all connected to bell wires from the EEC. I would spray clean the thing first, if no help then use the old one as a template for the connectors and jumpers; sorry, don't think that it has a reset mode. I spect that it is easy to fry.

[LarryB]

OK, John I'll check into changing it. Our vintage buses have the 4 button controllers and they are hard to find. The 5 button are plentiful, that is the way it goes. Murphy!@!

[Danss]

I had a 5 button controller installed after the 4 button gave me trouble. A new board was put in each unit and it has eliminated all problems. What a pain it was to use the short finger method to change settings. Dan

[Larry W]

I purchased a rebuilt 4 button on Ebay last year and it works great. A guy in Colorado rebuilds the 4 button. The cost is $85 excahnge plus $10 shipping. Our Royale has two of the 4 button stats. One in the front for the front zones and one in the rear for the rear zones. Thought if the new lasted 9 years maybe the rebuilt will last 5 years.