View Full Version : ok jon, about them led marker lights...
bill&jody
07-05-2006, 10:45 PM
got a part number? web site? or was it jerry.:confused:
anyway i gotta need for new lighting.
i ordered a 1800intlbus catalog, oh, 5 weeks ago. nothing. i called and got a pdf of pages 76-135 of the upcoming 2006 catalog. no, i'm not sure i understand it either. anyway, if anybody wants a copy, i'll happily fwd a copy.
(its mostly sheet metal, some lighting, some moulding, some trim).
(and no, lew, i don't want the old ones)
wmm
MangoMike
07-06-2006, 07:53 AM
Bill,
Info on marker lights.
http://www.prevoman.com/Pages/Pictures/page2.html
Good luck,
Mike
Jon Wehrenberg
07-06-2006, 08:55 AM
Wmm,
When I saw the cost of an LED light assembly compared to the cost of a new light bulb I figured the savings alone would pay for at least one new tire.
But there are some folks here trying hard to get the bling award, so I'm sitting back letting them break their budget while I have just about got it locked up because I used part of the money I saved to bribe the 85 year old judge.
Don't let the LED wannabes exert any influence on you.
Jerry Winchester
07-06-2006, 11:17 AM
B&J,
Don't let ol' grumpy pants keep you from LED happiness. You will be very pleased with the results.
I ordered mine from IBP just like Mike says in the link. When you change them out, order some of those rubber inserts with the thread in the center. They push thru the hole in the stainless steel and the screw from the light goes in the hole.
You will have some of these that are wore or torn, so about 6 should get you through the project without a delay and they are pretty inexpensive. Tell the IBP guy what you are looking for and he knows what they call them.
Jon Wehrenberg
07-06-2006, 12:12 PM
Misery loves company. Jerry is trying to suck you into needlessly spending your money. He and Mango lit up their LED display for me down in Polk City, and I never even noticed.
I'm surprised they haven't given you a link to get some spinner hubcaps to go along with the LED lights.
Jerry Winchester
07-06-2006, 04:52 PM
B&J,
Don't be fooled. He didn't notice because he was asleep in his chair with the TV on. When we cranked up the laser spot light and flooded the front of his coach with light, he jumped to the task turning on every bulb he had.
And while his ancient bulbs were oozing on and off like an old man pissing in a urinal, Mike and I were sharp and brisk with LEDs a flashing and gators jumping into the water.
While I am sure Jon would rather JB weld some candle holders to the outside of his coach, I am sure his wife won't help him keep them lit, so fret not and join the blingsters for some LED fun.
Joe Cannarozzi
07-06-2006, 08:04 PM
What are the options for the upper markers front and rear. What about the front turns? Sure would be cheaper and a lot more variaty to choose from if they were 12volt? Just seems sensible to me. I probably wouldnt consider it on a new bus but ours is 21yrs old. I got a million other things to do. Theres volumes of styles to choose from though! Might make a nice project for one of those sunny January lazy afternoons, with some help from the blender!
lewpopp
07-06-2006, 11:13 PM
Let me let you Jon bashers in on a secret.
Jon asked a long time ago to find him some 22" spinners the Bling crowd uses. I finally found the web site at www.excessspin.com The phone # is 1-866-894-3351. They are awaiting your call Jon.
Sorry to bust your beans Jon. You engineers are a strange bunch.
Jerry Winchester
07-07-2006, 01:49 AM
Joe,
I have only replaced the side marker and all the tail / stop lights with LED's at this point. I have a test LED front marker to try and I will probably change out every bulb on the coach except the head lights.
I have all the old bulbs and will mail them to Jon one a day for a quarter.
truk4u
07-07-2006, 09:05 AM
Bill,
Don't let them suck you in, stay on the dark side! Once you go LED you devalue your bus and Roger will be standing by with a check to quickly turn your bus for some nice Lew bucks. If your not careful, the LED weenies will have you parting with the Harley for a Goldwing with ring-of-fire LED's on the front wheel.:D
By the way, that wasn't Jody with the 357 Magnum Ken was telling us about, was it?:cool:
ken&ellen
07-07-2006, 09:29 AM
Tom, That girl was much taller!:p Ken
Jon Wehrenberg
07-07-2006, 09:53 AM
Bill, everybody on the LED side of this discussion has failed to point out some of the facts.
A new LED side marker light is about $15.00, not counting all the labor and farting around to make it fit the coach.
A replacement bulb for your factory installed lights is about $1.00 The bulb will last about 10 years.
Maybe the LED crowd can tell you why the LED lights are worth the expense which by the time Jerry gets done replacing all his lights will end up costing the price of a new air compressor and the labor to replace it.
Coloradobus
07-21-2006, 10:13 PM
Oh drat, we have succumbed partly to the side of LED weenies. Replaced all the side marker lights with LED's from the Lighthouse. The coach rear is still incandescent. Just can't justify the thousand bux needed to order from Mira Loma.
Has anyone tried those LED bulbs for the conventional sockets?
Just Plain Jeff
07-21-2006, 10:42 PM
According to the technical weenies (who actually get paid for what they know) all LEDs operate at 1.5 volts. What is required is a conversion from either 12v or 24v to 1.5v. I'd trust Mango on this one. Last I heard from him he was trying to follow Jon through a toll plaza in Illinois; back on the forum in about a week.
And goodness knows, what we will be seeing in the next week (but expect some surprises, heh, heh).
Jerry Winchester
07-21-2006, 11:54 PM
Jim,
I replaced all the rear bulbs with LED that just replace the old bulbs. There is a thread on this with links to the place that sells them. Just search LED's.
They looked brighter and will live infinitly longer. Once you install LED's you'll never go back to the old candle and wick.
win42
07-22-2006, 01:02 AM
I need some real help on lights. My 91 Royale has a "Vanner" panel in the engine compartment proclaiming it is for 12V headlight use only. Are the clearance lights and other lights 12v or 24V? I tried to check the clearance light with a volt meter with no results. Is it a two wire system not using the coach for ground? The coach is in the paint shop getting a new dress. I need to replace the aging sun worn lights to match the new paint. The LED clearance lights from IBP seem to be the way to go there, but which voltage?
Tail lights are next, is there source for some that will fit and with new lenses.
I need to get these items ordered ASAP.
Thanks for any help offered.
Harry
Jerry Winchester
07-22-2006, 09:14 AM
Harry,
My '92 is all 12V for the marker, clearance and tail lights and I'll bet yours is the same. We had the tired looking lenses too and we replaced some and polished some. They look much better now.
While Jon was entertaining a few anal pilots, Jerry and Mango got together to compare LEDs.
It turns out that Mango has installed LED "Neon" under his bus:
http://www.mulelighting.com/ledflex/ ("http://www.mulelighting.com/ledflex/")
http://www.househacker.com/images/flexled.jpg
Not to feel outdone, Jerry replaced his bathroom faucet with one that lights the water with LEDs:
http://www.thinkgeek.com/homeoffice/gear/8122/ ("http://www.thinkgeek.com/homeoffice/gear/8122/")
http://www.thinkgeek.com/images/products/zoom/faucet_light.jpg
That's when Mango decided to light his bays with these:
http://www.stopbox.co.uk/wall-lights/led/multi-colour ("http://www.stopbox.co.uk/wall-lights/led/multi-colour")
http://www.househacker.com/images/subdiscobaby.jpg
...and to make sure Jerry couldn't keep up, Mango decided to install a $2500 computerized bar:
http://www.barmonkey.net/v5.asp ("http://www.barmonkey.net/v5.asp")
http://www.barmonkey.net/images/v5-25.jpg
Let's hope they LED bling thing ends at POGII.
ken&ellen
07-26-2006, 04:47 PM
Ben, That faucet was incredible! I am not a LED guy, but that is too cool. Ken:cool:
Jim Skiff
07-26-2006, 04:54 PM
Ben,
That there LED faucet is over the top! Are you sure you aren't going to skip Iceland and bring that action to POG II?
If the like the faucet, then check out these door handles... imagine being able to tell if the bathroom door is locked from down the hall:
http://gizmodo.com/gadgets/gadgets/lighted-door-handle-189021.php ("http://gizmodo.com/gadgets/gadgets/lighted-door-handle-189021.php")
http://gizmodo.com/gadgets/upload/2006/07/door_handle_lighted.jpg
Just look out because Jerry is starting to add some LED bling to his toad:
Wheelwell LEDs:
http://www.amazon.com/gp/product/B0006ZRFJ8/sr=1-5/qid=1153944020/ref=sr_1_5/103-7480163-6101464?ie=UTF8&s=automotive ("http://www.amazon.com/gp/product/B0006ZRFJ8/sr=1-5/qid=1153944020/ref=sr_1_5/103-7480163-6101464?ie=UTF8&s=automotive")
http://ec3.images-amazon.com/images/P/B0006ZRFJ8.01-A3DA4M7GS6WEB2._SS500_SCLZZZZZZZ_V1137560343_.jpg
Doorhandle LEDs:
http://www.amazon.com/gp/product/B0006ZRGXI/sr=1-12/qid=1153944020/ref=sr_1_12/103-7480163-6101464?ie=UTF8&s=automotive ("http://www.amazon.com/gp/product/B0006ZRGXI/sr=1-12/qid=1153944020/ref=sr_1_12/103-7480163-6101464?ie=UTF8&s=automotive")
http://ec3.images-amazon.com/images/P/B0006ZRGXI.01-A3DA4M7GS6WEB2._SS500_SCLZZZZZZZ_V1137563951_.jpg
Undercar LEDs:
http://www.amazon.com/gp/product/B0006YY5P6/ref=pd_sbs_auto_3/103-7480163-6101464?ie=UTF8 ("http://www.amazon.com/gp/product/B0006YY5P6/ref=pd_sbs_auto_3/103-7480163-6101464?ie=UTF8")
http://images.amazon.com/images/P/B0006YY5P6.01-A3DA4M7GS6WEB2._SS500_SCLZZZZZZZ_V1136926844_.jpg
With all that light, I doubt anyone will be able to sleep at POGII
Just Plain Jeff
07-26-2006, 05:09 PM
Let's lay off on Jon. He isn't aware that his coach is actually a Hyundai conversion. Age is a tough hill to climb.
Jerry Winchester
07-26-2006, 08:56 PM
Rae and I were scoping out some bus bling at OSH when we wondered upon a working display. While I was checking it out, she hits the on switch and when the LED's flash, it blinds me. I stumble around the aisle trying to find MangoMike so she could blind him too but all I can see are feet and ceiling fans.
We are taking bling to a whole new level. We may have to issue welding goggles at Santa Fe.
But that LED faucet is too cool.
Jon Wehrenberg
07-26-2006, 09:15 PM
I'm back and going through the rule book. Somewhere the weenies that were playing at posting in my absence appear to have defined bling as LEDs.
The REAL dissapointment is CObus. Here's a guy that professes to have the killer paint job and some as yet undefined bling, and he caves and gets some LEDs.
What part of being copycats can't you folks understand? If LEDs were standard on our buses when they were built, there would be a mad rush from the forum members to convert their almost bling machines to incandescent. Save it guys. I won. I'm just coming to SF to pick up the award.
Coloradobus
07-26-2006, 09:58 PM
Oh Calm down now Jon,
We must not get our nose out of joint and our jockies in a wad, eh?;)
We had the LED's since last year after the fantabulas paint job. It's just icing on the cake. Our S.(ecret) W.(eapon) is far and above better than a few lites. Remember "silver is best" but it doesn't necessarily mean "stainless".:p :D
There are 77 days until the "Bling Explosion", so "all y'all better buy stock in charcoal, the "cooker's R's.:)
Jon Wehrenberg
07-26-2006, 10:03 PM
When you say silver Winchester is going to be down at Wal-mart tomorrow buying out the silver spray paint for his 8V92 "Silver" thinking he has it made.
I'll bet you have the polished stainless steel engine bolt option kit on yours like I have on mine. That certainly compliments the optional gold plated manifolds.
Don't get finger prints on my grille.
Coloradobus
07-26-2006, 10:17 PM
Yep, you're on to us now, bummer! I know I have a big mouth, oh well.
What we did, we had the turbo re-done in "transparent aluminum" with a diamond encrusted turbo blade. LED lites are directed to shine on it with a flick of the a switch. Sparkling!!!!
AND, we added platinum coated valve extensions, and silver-plated the ignition key as well. Oh, almost forgot, we gold-plated the top-hats on the mirrors! It's amazing what you can buy from JC Whitney and Marathon.:D
2000 Marathon "H" Blinged to hilt, with an equally impressive towed and accessories!
Jon Wehrenberg
07-26-2006, 10:23 PM
Accut....are you sitting there with Roget's Thesaurus?
Speak English. We have Texans on this forum that pretend they are literate.
Coloradobus
07-26-2006, 10:38 PM
maybe I should change it to this: accessories, accutriments didn't look right. Or how about this!!
2000 Marathon "H" Blinged to hilt, with an equally impressive towed and other EXCESSORIES!
Jon Wehrenberg
07-26-2006, 10:45 PM
I wasn't as worried about my interpreting ability as I was the Texan who will claim he is really from OK.
For a week he wore the same shirt that said "OSU" which everybody knows is a school in Central Ohio. He insisted however it meant Oregon State University or some other foreign territory. Lets see what he has to offer on how many syllabbbellls we are allowed to use.
Don't say anymore about bling because he really gets upset.
dalej
07-27-2006, 12:14 AM
Man this is by far better then TV, just to sit and read this stuff, it's great! Keep it coming.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.