PDA

View Full Version : Wireless Dual Band cellular amplifier



lloyd&pamela
12-11-2008, 07:32 PM
We have 4 cell phones (2 US / 2 CAD) and 2 aircard (1 US / 1 CAD) and we want to boost the signal. We have talked to Wilson Electronics and the problem is eliminating feed back from the internal antenna and the external antenna. They need 20+ feet separation. I wanted to mount the external antenna up from with all the rest and put the cable directly into the new electronics area. But the distance requirement is causing a cabling problem.

Does anyone have a solution that will allow multiple cell phones and PC aircard to access a signal booster simultaneously?

ajducote
12-11-2008, 09:37 PM
Lloyd,

I use a Wilson amp in my bus. I put the antenna in the front left corner of the front cap then ran the antenna lead down the left side above the windows, behind some trim. At the end of the antenna lead I installed the amp. There just happened to be a 110 volt plug right where I needed it. Then attached the interior antenna lead and put the magnetic mount under the microwave. Seems to work well for use with a verizon cell phone and data card and also the att cell phone. It really does help.

lloyd&pamela
12-11-2008, 11:54 PM
Thank you.