View Full Version : Need SJ-27 oil for Jun-Air compressor
Alek&Lucia
05-03-2008, 06:23 PM
I need SJ-27 oil for Jun-Air compressor.
Anybody has a good source for it ? Is there any substitute for this oil ?
Alek
JIM CHALOUPKA
05-03-2008, 10:23 PM
Alec, here's a source for you.
https://www.dentalequipmentparts.com/product.php?prodID=856
Additionally note:It is important to observe that the maximum duty cycle of the oil-lubricated JUN-AIR compressors is 50% and that the maximum operation time of each cycle is 15 min. Consequently, a standstill of 15 min. is required before the next start.
Only genuine SJ-27 oil may be used on JUN-AIR’s oil-lubricated compressors in order for the compressor to work properly.
Anyone else thinking synthetic oil in a compressor would be a good thing should research it thoroughly, before just going at it whole hog.
Some compressors and air systems have components that will fail prematurely when synthetic oil is used.
Alek&Lucia
05-06-2008, 09:06 PM
Thank You Jim, anybody else has a good source ?
Alek
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.